Skip to main content
Plaats je cv - In enkele seconden

Electrical Engineer vacatures in Eindhoven

Sorteer op: -
    • A fundamental understanding of electrical and electronics design;
    • To stay ahead in our industry, Allseas develops a lot of our automated equipment in-house.
    • Toon alle vacatures voor Allseas - Vacatures in Eindhoven
    • Zoeken op salaris: Electrical Engineer salarissen in Eindhoven
    • Zie veelgestelde vragen en antwoorden over Allseas
    • Jij maakt industriële impact door besturingsinstallaties slim en veilig te ontwerpen.
    • Hoe je samen met ons vooruit gaat.
    • Het vormt onze basis om op te groeien.
    • 8+ years of broad electrical engineering experience, ideally in capital equipment or high‑precision systems.
    • Drive electrical engineering best practices, design…
    • Je krijgt energie van het uittekenen en voorbereiden van technische installaties.
    • Je vindt het leuk om structuur te brengen in complexe technische informatie.
    • A Reliability Engineer is responsible for reducing unplanned factory TRS losses through continuous improvement of asset maintenance investment strategies,…
    • Welkom bij AAE, een hightech familiebedrijf in Helmond.
    • Als Lead Electrical Engineer bij onze businessline Advanced OEM Systems (AOS) krijg je de kans om impact…
    • You work at the interface between design and production, translating complex device concepts into stable, scalable processes that actually run on the factory…
    • Uren Fulltime (32 - 40 uur).
    • Als Electrical Hardware Engineer wil je meer doen dan alleen schema’s tekenen.
    • Afhankelijk van de opdracht werk je zelfstandig of…
    • Als Mechanical Engineer wil je techniek ontwikkelen, verbeteren en realiseren.
    • Je werkt aan uiteenlopende projecten bij verschillende opdrachtgevers.
    • A bachelor’s, master’s, or doctoral degree in mechatronics, mechanical engineering, electrical engineering, robotics, applied physics, or a related technical…
    • Do you like to use your creativity, your in-depth knowledge of physics principles, numerical math's and machine learning, and your hands-on experience with…
    • Perform both mechanical and electrical installation tasks.
    • Experience in electrical and mechanical assembly within a high-tech or industrial environment.
    • €3900 - €5500 *This is a guideline; your salary will depend on your knowledge and experience.
    • (guideline) gross monthly salary for full-time employment.
    • €4200 - €5400 *Dit is een richtlijn, jouw salaris is afhankelijk van je kennis en ervaring.
    • Met tools zoals Eplan (Pro Panel) integreer je ontwerp, 3D…
    • €3400 - €4800 *This is a guideline; your salary will depend on your knowledge and experience.
    • (guideline) gross monthly salary for full-time employment.

Anderen zochten naar:

plc engineer

Job Post Details

Electrical Engineer
Allseas
·
3.7
Eindhoven

Vacaturedetails

Geen salarisinformatie beschikbaar
Via Eindhoven

Volledige vacaturetekst

Department Description


Are you a creative and experienced Electrical Engineer ready for the next step in your career? To stay ahead in our industry, Allseas develops a lot of our automated equipment in-house. As an Electrical Engineer at our office in Eindhoven, you will play a pivoting role in driving the design, development and implementation of cutting-edge electronics in our custom built machinery for inspection of subsea pipelines.

Allseas is a world-leading contractor in the offshore energy market, with dynamism, rapid progress and pioneering spirit at its core. We continuously develop new techniques and applications to stay ahead in an ever changing industry.


Your role

As an Electrical Engineer you will design the electronics of custom built equipment from scratch. Our equipment is built bespoke for our fleet, so we focus is on highly specialized one-offs instead of on high-volume series production. Together with a multidisciplinary team you will determine what the electronic system is supposed to achieve and define functional requirements, inputs, outputs and other interfaces. We like to approach this design challenge on a system level and focus attention where it matters, so our equipment is built using a mix of off-the-shelve industrial components combined with custom PCBs and wiring harnesses. Designing these PCBs (schematic and routing) and breaking down the system into logical components and interfaces will be part of your job. You are responsible for the component selection and the prototyping. Adjustment needed after testing and quality control will be implemented to the prototype followed by a testing programme together with our (offshore) end-users.


What we expect from you

For this job you will need:

  • Bachelor or Master's degree in Electrical Engineering or Mechatronics;
  • Three to five years of proven experience in developing electronics;
  • A fundamental understanding of electrical and electronics design;
  • Affinity with KiCAD and EPLAN is beneficial but not strictly required;
  • The ability to create structured and logical breakdowns of your designs for clear communication with your colleagues (including those from different disciplines);
  • A solid understanding of PCB manufacturing techniques and related connection technologies (board-to-wire, wire-to-wire, etc.);
  • A basic understanding of EMI issues and mitigation strategies.

Beneficial but not strictly required:

  • Affinity with industrial communication protocols such as EtherCAT, CAN(Open), PROFINET and ModBus;
  • A basic understanding of embedded / industrial software development;
  • A basic understanding of motor / servo control.

Besides the above mentioned requirements, you recognise yourself in the following characteristics. You are very flexible and keep up the positive spirit if a project makes a 90 degree turn from one day to the other. You enjoy starting from scratch and have plenty ideas how to solve a task or problem. Besides that, you like being responsible from concept to commissioning and you are able to take decisions by yourself. Your good communication skills will help you to defend and explain the choices you made to everybody involved.


What we Offer

Joining Allseas gives you the chance to work in a dynamic, fast-paced, entrepreneurial environment, with creative thinking, collaboration and down-to-earth culture at its core.

You can expect:

  • Competitive industry benchmarked salary and excellent pension;
  • Performance based salary raises and bonuses;
  • 30 holidays days per year, flexible working hours;
  • Company-sponsored fitness scheme;
  • On-the-job training, study budgets and coaching;
  • A close-knit community, BBQ’s, parties, (sportive) events and Friday afternoon drinks.


Allseas has earned the "World-class Workplace" label. This means that as an employer we score above Effectory's global benchmark for being a good employer. The label is based solely on feedback from our employees. Wondering what our people say about working at Allseas? Read their stories.


Interested?

If you feel that you can contribute to our business by diving into this exciting opportunity, we are looking forward to receiving your CV and motivational letter! Please apply via the ‘Apply’ button.

An online personality questionnaire can be part of the selection procedure.

Acquisition is not appreciated.

Zorg ervoor dat werkgevers je kunnen vindenUpload je cv